|
BEARINGS |
We at Rosskeen Supply Company can
supply a wide range of bearing units. If you need Ball, Roller and
Thrust in Metric and Imperial dimensions. Spherical, Taper Roller,
Miniature or Needle Roller Bearings, come and see us. |
 |
||
| Cast Iron | |||
One piece
cast iron housing. Regreasable. Steel Cage. Steel Plate Slinger.
Synthetic rubber seals. These highly durable bearings against wear
and tear. These units are used on mining machinery, chemical industry,
agricultural equipment, conveyors as well as general machinery. |
|||
| Perfect
Sealing - The inner synthetic seals are firmly assembled
on the outer ring and ensure perfect sealing of grease chamber. |
Self
Aligning – Spherical outer rings of the ball bearing makes it easy to adjust irregularities of centre height at time of fitting bearing to the units. |
Reliability
of Load Capacity – By using deep raceway grooves
and larger balls whilst ensuring high precision in manufacture it
is possible to maintain constant radial loads. |
 |
|
Bore
Size – 12mm to 140mm, ½ inch to 4 inch |
 |
 |
|
Cast iron units can be supplied
plated and fitted with stainless steel or chrome steel bearings
for food and chemical industries. |
|||
| Clean Series |  |
||
| Bore Size –
10mm to 30mm Housing – Zinc Alloy Die Casting Bearing – Pre lubricated. Inner ring and Set Screw with anti corrosive plating, Inch and Metric. |
End Covers
– Water Proof rubber coated covers, open and closed. Superior
sealing effect. Series – UP Pillow Block, UFL 2 Bolt Flange |
||
| Plastic Housing | ||||
| Bore Size –
20 – 50mm Material – PBT high grade glass filled polyester Colour – Green Bearings – Stainless or chrome steel, inch and metric |
 |
Range – 2 bolt flange, 4 bolt flange, pillow block, hanger unit, take up, Tapped base, extended hangar flange, End covers open and closed. Back Seal available. | ||
| Stainless Steel | ||
|
One piece stainless housing material SCS13 Outer and Inner ring 440C. Ball 440c, Slinger SUS 304, Set screw SUS410. Construction – Same as cast iron series. |
 |
Temperature Range
- -20 to +100C Range – Pillow Blocks 2 bolt flange, Inch and Metric. End Covers – Open and Closed Bearing Grease – FDA Approved |
| Ceraball Pillow Block |  |
New Bear |
|
Ceramic balls in bearing housing of Cast Metal
or Stainless Steel. Bearing Hybrid with Ceramic Balls withstanding temperatures of -40 to +500C. |
Bearings with plastic cover for carrier rollers. | |
All of the
above bearings have oil grooves in the outer ring for better lubrication
and produce Triple seal, Taper Bore, Heavy Duty and with High temperature
Grease. |
||
|
|
